Product ID:EPOXY CURING AGENT, FE-7001-B
MSDS Date:12/12/1988
FSC:8010
NIIN:00N020837
MSDS Number: BLJBG

Emergency Phone: 612-481-3300

Info Phone: 612-481-3300

Preparer: INDUSTRIAL HYGIENE

Cage: 0HD19

Telephone: 612-481-3300

Cage: 0HD19

POLYAMIDE RESIN

Fraction By Weight: >10%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES:STRONG IRRITANT.
SKIN:CONTACT WILL CAUSE MODERATE IRRITATION. INHAL:NOT A ROUTE OF
EXPOSURE. CHRONIC:NO ANTICIPATED EFFECTS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NO KNOWN EFFECTS ON OTHER
ILLNESSES.

First Aid:EYES:FLUSH IMMEDIATELY WITH LARGE AMOUNTS OF WATER FOR AT
LEAST 15 MINUTES. CALL MD. SKIN:WASH AFFECTED AREA WITH SOAP AND
WATER. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE. INHAL:REMOVE
FROM EXPOSURE . RESTORE BREATHING IF NECESSARY (O2/ARTIFICIAL
RESPIRATION). KEEP WARM AND QUIET. CALL MD. INGEST:CALL MD
IMMEDIATELY .

Flash Point Method:TCC
Flash Point:>200F,93C
Extinguishing Media:WATER SPRAY, FOAM, DRY CHEMICAL OR CARBON DIOXIDE.
Fire Fighting Procedures:PERSONS EXPOSED TO PRODUCTS OF COMBUSTION
SHOULD WEAR NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:NONE KNOWN.

Spill Release Procedures:WEAR RUBBER GLOVES AND WIPE UP WITH ABSORBENT
MATERIAL. RESIDUE MAY BE REMOVED WITH CHLORINATED SOLVENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN COOL DRY LOCATION.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NOT NORMALLY REQUIRED. USE NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:STANDARD INDUSTRIAL VENTILATION.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:APPROPRIATE PROTECTIVE CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
WASTE DISP METH:FOR ADDITIONAL WASTE DISPOSAL ASSISTANCE CONSULT HB
FULLER ENVIRONMENTAL SERVICES AT 612-481- 1588.

HCC:N1
Spec Gravity:0.9704
Appearance and Odor:LIQUID
Percent Volatiles by Volume:100%

Stability Indicator/Materials to Avoid:YES
NONE ESTABLISHED
Stability Condition to Avoid:NONE ESTABLISHED.
Hazardous Decomposition Products:INCOMPLETE COMBUSTION CAN YEILD LOW
MOLECULAR WEIGHT HYDROCARBONS, CO AND NITROGEN COMPOUNDS.

Waste Disposal Methods:THIS PRODUCT DOES NOT MEET THE DEFINITION OF
HAZARDOUS WASTE UNDER US EPA HAZ WASTE REGULATIONS 40 CFR 261.
STATE OR LOCAL HAZ WASTE REGS MAY APPLY IF THEY ARE DIFFERENT FROM
FED REGS. INCINERATE/DISP OSE OF IN APPROVED INDUSTRIAL
LANDFILL.(SUPDAT)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.